AUDIO-GD A2

AUDIO-GD A2

335,00 €
Tasse incluse

2500 mw Pure Class A Headphone Amp & Preamp
Apply ACSS technology, Fully Non-Negative Feedback design
Fully Discrete Transistors Design

Quantità
Ultimi articoli in magazzino

 

GARANZIA2 anni Assistenza e supporto

 

RESO Entro 14 giorni


VIDEO AUDIO-GD

VIDEO A2       

MANUALE D'USO

  Class A design built by discrete analog stages without any OPA or coupling caps in the signal channels.
         2 pair accurate matched  20W (in total 80W Pcm) output transistors .
         Non- feedback ACSS and output stage designs 
         2500mW at 25 ohm Pure Class A ,drives most headphones working in pure class A 
         ALPS-27 hifi grade volume port 
        14DB and 20DB gain can drive the high and low sensitivity headphones
         3 groups input: RCA X2, ACSS X1
         Preamp output : RCA
         Headphone amp output: 6.3MM X1 
         Built in two groups sound flavor settings for users tweak the sound match with the system or personal favorite

Fully discrete transistor amps design:

                                      

Technology detail 
Detail of the Current Conveyor (ACSS) Technology
 

Impedance matching:
         There are a lot different quality DACs. They had different design and output impedance . To avoid negative effect on sound quality by differences in DAC's output impedance, in the A-2, we have design a pair diamond differential   buffers in the input . All the RCA input signals go through these  buffers, the output impedance become very low, even if the source have high or low output impedance. 
         The diamond differential  buffers working in pure class A , and it has a short signal journey. this way we can keep the sound quality without colouration ,(dry and harsh) .
              

Core:

         A-2 has the ACSS design  . It is a pure class A design built by discrete analog stages without any OPA or coupling caps in the signal channels.
         They seem complex , but in fact they are the most simple design the world has ever had . The simplest and shortest signal journey brings out the most neutral and least coloured sound.
         The ACSS is a non-feedback technology made with discrete amplifiers. Most people know the global feedback design can offer better specs in test measurements, and non-feedback can't do well in test measurements but can offer better sound for the human ears. Here it is a conflict of the classic circuits. 
          But the ACSS opens a new field, it can offer a least colouration sound which is more neutral with very low distortion and high linearity. So it can retain the dynamics, detail and neutral sound but not sound bright or harsh.
          All signal gain is in current area, all transistors work in pure class A mode.


Strong class A output stages:
          The A-2 have in its design a pare diamond differential output stages.
          The output stages have two pairs of 20W transistors offer 2500MW at 25 ohm Class A ,drive most headphones (work in pure class A ) ,no matter if you have low sensitivity headphones


                                              Hi-Fi parts apply:
          Though the A-2's price is low but it apply the high grade parts, include the well know good sound quality ALPS volume port , foot holes transistors ,high performance R core transformer, full aluminum chassis, CMC RCA sockets, there is no compromise on the building quality .

                                 

                                         USER MANUAL

                               Set the A-2 has warmer sound:
        The two different settings  for set the A-2 have warmer sound. Push into 2 or 4 pc jumpers let they active .
        The above setting in the below photo can effect the sound become warmer for the RCA inputs .
        The bottom setting can effect the sound become warmer for all inputs .
        U
sers can setting both to let the sound more warmer . 
(Please pull out the power cord before the cover of the chassis is taken off .)

                                 

Select the input channel:

Push the "Input" button to select the input channels.
 

Gain mode:  
Push the button "Gain", to select the gain mode between " L, H" .

"L" mean the unit working on low gain ( 14DB).

"H" mean the unit working on high gain (20DB).
 

Output mode:  

Push the button "OUTPUT", to select the output mode between " HP , PRE".

"PRE" mean the unit output from RCA  from rear. 

"HP" mean the unit output for headphones on front plate.


Volume knob : 

          Change A-2 volume .

Gain
 

Gain L : +14DB
Gain H : +20DB

Headphone amp Output Power
 ( Pure Class A )


25 ohm: 2500MW
40 ohm: 1600MW
100 ohm: 650MW
300 ohm: 325MW
600 ohm: 160MW
 

 Preamp Output Level (Max)

8V @ RCA


Input impedance
 

47K ohm @ RCA
<10 ohm @ ACSS

Power Requirement

1 Version  100-120V  AC 50/60 Hz
2 Version  220-240V  AC 50/60 Hz

Power Consumption

20W @240V or 120V

Package Weight

Approximately 3.5KG


Dimensions
 

W240 X L240 X H85 (MM, with feet, Fully aluminium ) 

Accessories

Power cord  X1

1 Articolo

Scheda tecnica

peso
3,5 KG

Riferimenti Specifici

16 altri prodotti della stessa categoria:

Opinioni

Nessuna opinione al momento

Scrivi la tua opinione

AUDIO-GD A2

2500 mw Pure Class A Headphone Amp & Preamp
Apply ACSS technology, Fully Non-Negative Feedback design
Fully Discrete Transistors Design

Scrivi la tua opinione