Precision 3S Power Amp

Precision 3S Power Amp

€573.00
Tax included

Precision 3S 
Non-Feedback Discrete ACSS Power  Amp 
7
0W X2 (8 Ohms) & 15W X2 (40 Ohms Headphone)
Support bridge amp and Bi-amp

Quantity
There are not enough products in stock


 

WARRANTY2 years warrantyDedicated support

 

EASY RETURN 14 days satisfied or refunded

The Precision 3S is based on the Precision 3 but changed some parameter, the sound has improved on musical.

 

P3-2s.JPG



Cables maybe required:

Standard 2 channel single ended:

Standard ACSS cable :USD25/pair/1M (For single-ended ACSS preamp)
Standard RCA cable : USD35/pair/1M (For single-ended RCA preamp)

2x P3 Bridged (Mono) balanced:

Bridge ACSS 1 to 2 cable : 40/Pair (For balanced ACSS preamp; requires 2x Precision 3 in bridge mode, 1 Meter)

Bridge XLR-2RCA cable: USD65/Pair (For balanced preamp, requires 2x Precision 3 in bridge mode, 1 Meter)

P3XLRtoRCAcables.JPG  P3ACSSbridgecables.JPG

2X P3 Bi-AMP (Mono) 4 channels:

Bi-amp ACSS cable 1 to 2 cable : 40/Pair (For single ended ACSS preamp; connect 2x Precision 3 working in bi-amp mode, 1 Meter)

Bi-amp RCA 1 to 2 cable: USD50/Pair (For single-ended preamp; connect 2x Precision 3 in bi-amp mode, 1 Meter)

Headphone output cable

Headphone adapter cable: USD50 (For Precision 3 drive single ended 6.3MM headphone, 0.6 Meter)

P3headphonecables.JPG

Audio-gd products had design and test based on the AP SYS-2722 (The top-drawer professional equipment in world) 
7s.JPG8s.JPG9s.JPG10s.JPG12s.JPG15s.JPG18s.JPG25s.JPG17s.JPG



Summary
Fully discrete design, Non- feedback, current mode ACSS and DC coupled analogue power amplifier
The gain stages and pre-buffer stages all work in class A, built with discrete analogue stages without any opamp or coupling capacitors in the signal channels. 
Diamond Cross Non-feedback output stages designed to avoid "switch distortion", rivaling class A amps.
2 analogue inputs: RCA and proprietary ACSS single ended
In total 4 transistors (150W / 15A each). Supports 70W X2 (8 Ohms) output power and 13W X2 (40 ohm headphone)
Power Supply capacity of more than 40,000 uF, powered by oversized transformers
Built with high quality precision 0.1% KOA resistors and WIMA capacitors.
To guarantee cleanest sound and avoid electromagnetic radiation internal metal shielding panels are installed 

Sound characteristics: 
      
We have designed the unit to provide neutral sound and keep the right harmonic distortion to experience a smooth and rich sound.

Please note: 
      
Read the User Manual page before using the Precision 3.

 

Detail of the Current Conveyor Technology

 

Main:
        Precision 3 is a discrete design applying the latest ACSS technology which improves the RCA connection to be able to sound as good as the ACSS connection. It seems complex, but in fact it is most straightforward design in the world. There are a lot components in the power supply providing rich and clean sound. The Precision 3 power amp has a single “voltage" gain stage to process signals, but works fully in ACSS mode; which in fact is a current gain stage instead of the standard voltage gain stage. The voltage gain state applied by almost all manufacturers requires at least two or three voltage gain stages. We implemented most elementary and shortest signal journey resulting most neutral and cleanest sound.

          Precision 3 applies ultra-low distortion single stage ACSS amplifier soldered directly on the motherboard to reduce noise floor even more. The gain stages and pre-buffer stages are all designed to work in pure class A .

         The diamond cross output stage design avoid "switch distortion" as good as the best class A amp.

         The ACSS is a non-feedback technology is designed with discrete amplifiers. Most people think the feedback design offer better specs in test measurements, and non-feedback isn’t as good. Putting the measurements aside, non-feedback offers more pleasant sound for the human's ears. This is a pyridoxal conflict of classic circuits. Our developed ACSS named technology opens a new field: It can offer a neutralsound with very low distortion and high linearity. Retain the dynamics, detail and neutral sound without sounding bright or harsh.

       All signal gain are in current mode, achieved by the unique, superb open-loop multiple output current mirror. Incomparably precise and ultra-low distortion in the gain signal is the result. The signal path is balanced throughout and all transistors work in class A mode.

 

Drives:
        Massive use of high power parts and robust power supply guarantees vigorous current output that drives almost every loudspeaker.
        Precision 3 applies two channel diamond non-feedback output stages composed of 4 transistors, every transistors can handle 150W / 15A . The power supply capacitance is over 40,000uF. 


        The Precision 3 have very wide frequency band with excellent phase distortion, and boost the amp to have excellent detail and  dynamic reproduction.


Inputs: 
       Precision 3 has RCA single ended inputs and top grade proprietary ACSS current signal inputs. No matter what kind of signal it is input .



Components:
        Solely audiophile grade components being used, e.g. 0.1% KOA resistors, WIMA caps, and custom ordered NOVER (UK brand) caps.

S/N Ratio

>115DB 

THD 

< 0.003%

P3THDs.JPG

 Power Output 

70W @ 8ohm / 15W @ 40ohm

 Output Level (Max)

25V


Input sensitivity
 

1.5 V RMS @ RCA
2mA RMS @ ACSS


Input impedance
 

47K ohm @ RCA
<10 ohm @ ACSS


Gain
 


25DB
 

Frequency Breadth 

20Hz - 20KHz (  -  0.5DB )

P3FRs.JPG


Channels cross
 

< -100DB


Channels imbalance
 

< 0.05DB

Power Requirement

1 Version  100-120V  AC 50/60 Hz
2 Version  220-240V  AC 50/60 Hz

Power Consumption

30W static @240V or 120V

Package Weight

Approximately 8KG 


Dimensions
 

Approximately W240 X L360 X H80 (MM, Fully aluminium ) 

Accessories

Power cord    X1

Operating Temperatures

+5 °C to +40 °C

Operating Humidity

5 % to 90 % (without dew)

Specific References

You might also like

4 other products in the same category:

Reviews

No customer reviews for the moment.

Write your review

Precision 3S Power Amp

Precision 3S 
Non-Feedback Discrete ACSS Power  Amp 
7
0W X2 (8 Ohms) & 15W X2 (40 Ohms Headphone)
Support bridge amp and Bi-amp

Write your review